ProSelect30

PRODUCTS

The new-generation CVD coating was adopted, and the wear resistance was improved.
Thick alumina coating with excellent heat resistance enhances high temperature characteristics and plastic deformation resistance.
The tool life is stabilized since wear occurs smoothly during machining, adopting a highly stable new base material to achieve excellent defect resistance.

This milling cutter covers both high feed and large depth of cut, for high efficiency machining.
The dovetail structure prevents the insert from floating and gives stable clamping without using a clamp bridge.
The cutting edge forms short chips that prevent the cutter body from chip jamming and tangling as well as allowing for easy cleaning inside of machine tools.

This is an end mill that pursues the performance required for the processing of copper electrodes. High accuracy machining was realized by synergistic effects of cutting configuration and DLC coating. That realizes long life and stable accuracy even for Copper-tungsten processing. Ultra-fine-grained cemented carbide is used for tool materials, and φ0.1-6 (R0.05-R3) mm is prepared for this series.

A long-edged length AE-VML is newly added to the A-branded end mill AE-VMS series, and it will be shown for the first time at JIMTOF 2018.
The AE-VMS series has been developed to cope with a wide variety of work pieces and a wide range of machining, focusing on high-efficiency machining, shortening of working hours, cost reduction, and finishing of machining surfaces.
A new “DUARISE coating” excellent in lubricity, abrasion resistance, and high temperature oxidation resistance is applied, and the composite multilayer structure suppresses thermal cracking.

This is a coated cemented carbide solid drill of high rigidity and long life. It can cope with a wide range of work pieces and processing requirements.
The high quality edge stabilizes the life of the drill shoulder and provides strength for a wide range of machining.
Improved marginal designs provide good holes accuracy and quality.

A large restriction is imposed on machining conditions in process of such as deep hole in which chatter vibration is liable to occur,. Therefore, DeepTri – Drill adopted slitter technology, it cut chips and suppressed chatter vibrations.
By adopting the coating material type for the insert, high speed machining which cannot be done by brazing became possible. It combines high efficiency processing that maintains processing stability and ease of management by indexable type.