News - July 31, 2019
On June 2019, DMG MORI introduced DMC125FD duo BLOCK, a 5-axis machining center that has function of grinding to Iga Plant in Mie Prefecture.
Heavy cutting and grinding after hardening, which conventionally had to use both of a horizontal machining center and of a grinding machine, are consolidated into one machine.
The production lead time was reduced by approximately 40% due to the reduction of setup. It can be machined by one chuck, and the machining accuracy can be increased without positioning errored occurred by reclamping. The machining demonstration was shown at the open house called Iga innovation days 2019 from July 9 to 13, 2019.
Source: SEISANZAI MARKETING Magazine July 2019 issue
This article was translated by “T-4OO”.
- July 11, 2019
To promote local production for local consumption DMG MORI, a world-class builder of machine tool, proposed a robotic system combined with machining center. The robotic system "MATRIS " is composed of combining units for each application...
- May 30, 2018
On April 13, 2018, DMG MORI announced that it would conclude a comprehensive agreement with Mie Prefecture on industrial development and regional revitalization. This was the second agreement with local governments for the company, follo...
- December 26, 2018
Turning Center [ALX 1500/2000/2500] DMG MORI This is a turning center with a total of 36 variations by function, including chunk size and distance between centers. The chunk size has three patterns of 6 inches (ALX1500), 8 inches (ALX...
- June 15, 2018
On May 16, 2018, DMG MORI announced that they established a new company called “Technium” with Nomura Research Institute in January this year. By combining the expertise of the two companies, the new company was launched with the aim of ...
- April 20, 2018
On March 9, 2018, Mazda and Toyota Motors announced the establishment of a joint venture, Mazda Toyota Manufacturing USA (MTMUS), in Alabama. MTMUS will manufacture Toyota’s Corolla models as well as all new Mazda models, for the North A...
- December 3, 2018
On August 30, 2018, Daihatsu announced that it would construct a new plant at the Kyoto Plant in Oyamazaki Town, Kyoto Prefecture. Approximately 35billion yen is invested. The total floor area is approximately 42,000 square meters. The n...
- January 25, 2019
On October 4, 2018 Honda announced that it would establish a new production line at the plant of affiliated corporation in India, where motorcycles have been manufactured and sold. The new production line will be set up at the fourth plant ...
- September 4, 2019
You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019. EMO Hannover 2019, the largest machine tool trade shows, will open its door soon. The EMO Hannover 2019 will be held for six...
- March 27, 2019
Toyota Motor North America (TMNA), Toyota Motor's affiliated corporation in North America, announced on March 15, 2019 that it would invest $750 million in five US vehicle and power train plants. TMNA intends to expand local production o...
- November 19, 2018
Automated production lines for watches started operation at a plant in Yamagata CASIO, a production subsidiary of Casio. Investments are not disclosed. Casio's long-selling digital watch "A159WA" will be manufactured on the line. The a...