News - April 19, 2019
A radius end mill with a blade shape specializing in high hardness materials.
High-speed steels with Rockwell hardness (HRC) of 65 can also be machined efficiently.
A special coating having both heat resistance and lubrication properties was applied to realize a longer life than conventional tools for high hardness materials.
There are four blades and six blades depending on the size of the tool diameter, and a total of 37 types with a diameter of 3 to 12 mm are prepared.
Source:SEISANZAI MARKETING Magazine December, 2018 issue
This article was translated by “T-4OO”.
- October 27, 2017
Mitsubishi Hitachi Tool Radius endmill [EHHRE-TH3] A complex radial configuration is adopted which can reduce the thickness of the chip compared with the conventional configuration. Even in the high feed processing of high hardness st...
- February 13, 2019
Frontal cutting cutter [FMAX series] Mitsubishi Materials Long-edge insert was added to the FMAX series of milling cutters for finishing aluminium alloys. It is possible to shorten the machining time without the need for interme...
- January 30, 2019
Special shape end mill for finishing [GP1LB type of GALLEA series] Mitsubishi Hitachi Tool Mitsubishi Hitachi Tool added insert of "GP1LB type" to deformed end mill "GALLEA series ". The end surface incorporates a lens R blade,...
- October 2, 2018
Mitsubishi Materials Carbide drill [Leading drill series DLE] These are cemented carbide drills with a 90 degree tip angle and are suitable for positioning and chamfering of holes. By devising the tool configuration, the strength of...
- April 20, 2018
On March 9, 2018, Mazda and Toyota Motors announced the establishment of a joint venture, Mazda Toyota Manufacturing USA (MTMUS), in Alabama. MTMUS will manufacture Toyota’s Corolla models as well as all new Mazda models, for the North A...
- December 3, 2018
On August 30, 2018, Daihatsu announced that it would construct a new plant at the Kyoto Plant in Oyamazaki Town, Kyoto Prefecture. Approximately 35billion yen is invested. The total floor area is approximately 42,000 square meters. The n...
- November 19, 2018
Automated production lines for watches started operation at a plant in Yamagata CASIO, a production subsidiary of Casio. Investments are not disclosed. Casio's long-selling digital watch "A159WA" will be manufactured on the line. The a...
- January 25, 2019
On October 4, 2018 Honda announced that it would establish a new production line at the plant of affiliated corporation in India, where motorcycles have been manufactured and sold. The new production line will be set up at the fourth plant ...
- November 21, 2018
On July 24, 2018, Toshiba Memory Corporation opened a construction ceremony for a new manufacturing building in Kitakami City, Iwate Prefecture. Total investment is expected to reach 1 trillion yen. It boasts the largest scale in the comp...
- December 2, 2017
With the growing need for factory automation, the demand for robots in the factory is rapidly expanding. However, robots require safety measures and teaching operations to be properly implemented in a facility before they can be considered ...