News - July 5, 2019

FANUC strengthens the production of ultra precision machine ROBONANO

FANUC announced on May 14, 2019, that it would build a new plant for ultra precision machine ROBONANO in its head office plant in Oshino-mura,Yamanashi Prefecture.

The investment amount is about 3.5 billion yen, and the total floor area is about 4650 square meters. It is planned to complete the construction in October 2019.

The number of units produced in ROBONANO will be raised from the initial monthly production of five units to ten units in the future.

In addition to the machining center-based ROBONANO, FANUC decided to construct a new plant in order to begin full-scale manufacturing of lathe-based ROBONANO. The existing two ROBONANO plants are integrated into the new plant to establish production lines.

Source: SEISANZAI MARKETING Magazine June, 2019 issue

This article was translated by “T-4OO”.

Share On :

Recommended

Exhibition report
- July 10, 2019

CIMT2019 Report: What Japanese companies propose to the Chinese market? (1/3)

CIMT is one of the four largest machine tool exhibitions all over the world CIMT2019, the largest machine tool exhibition in China, was held from April 15 to 20, 2019, at China International Exhibition Center in Beijing. CIMT is one of t...

Exhibition report
- February 27, 2019

Don’t miss this who couldn’t visit IMTS 2018!(4/5)

14 Japanese companies attracted the greatest attention from visitors(4/5)  "IMTS2018", Chicago Show, was held for six days from September 10 to 15, 2018, at McCormick Place in Illinois, U.S. The total of 129,415 visitors visited there...


- June 22, 2018

FANUC developed a robot system for dissimilar metal welding with Kobe Steel

On April 19, 2018, FANUC announced that they developed a robotic system with Kobe Steel which can firmly weld different metal such as ultrahigh strength steel sheets and aluminum with. In the automotive industry, there is high demand for...

News
- March 15, 2018

FANUC establishes a joint venture

Fanuc, Hitachi, and Preferred Networks announced on January 31, 2018 that they would establish a joint venture Intelligent Edge System on April 2, 2018. The aim is to develop real-time control systems such as machine tool, robots, and in...

News
- May 29, 2019

FANUC increases servomotor productivity by 20% by construction of the new plant

FANUC constructs a new plant for the part machining of servo motors in the head office plant of Oshino-mura,Yamanashi Prefecture. FANUC will promote efficiency by integrating two separate part machining plants into one. The investment am...

Most Popular

1

News
- April 20, 2018

Mazda and Toyota tag team on U.S market strategy

On March 9, 2018, Mazda and Toyota Motors announced the establishment of a joint venture, Mazda Toyota Manufacturing USA (MTMUS), in Alabama. MTMUS will manufacture Toyota’s Corolla models as well as all new Mazda models, for the North A...

2

News
- December 3, 2018

Japanese motor giant invests in innovation on its home turf

On August 30, 2018, Daihatsu announced that it would construct a new plant at the Kyoto Plant in Oyamazaki Town, Kyoto Prefecture. Approximately 35billion yen is invested. The total floor area is approximately 42,000 square meters. The n...

3

News
- January 25, 2019

Honda increased production of motorcycle scooters in India

On October 4, 2018 Honda announced that it would establish a new production line at the plant of affiliated corporation in India, where motorcycles have been manufactured and sold. The new production line will be set up at the fourth plant ...

4

News
- March 27, 2019

North America Toyota makes a large investment of $ 750 million

Toyota Motor North America (TMNA), Toyota Motor's affiliated corporation in North America, announced on March 15, 2019 that it would invest $750 million in five US vehicle and power train plants. TMNA intends to expand local production o...

5

News
- November 19, 2018

Japanese watch pioneer halves production costs through automation

Automated production lines for watches started operation at a plant in Yamagata CASIO, a production subsidiary of Casio.  Investments are not disclosed. Casio's long-selling digital watch "A159WA" will be manufactured on the line.  The a...

6

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   EMO Hannover 2019, the largest machine tool trade shows, will open its door soon. The EMO Hannover 2019 will be held for six...