Exhibition report - September 4, 2019

EMO Hannover 2019 Special Feature

You can peek a part of Japanese
FA companies’ products, which will be
showed off at EMO Hannover 2019.

 

EMO Hannover 2019, the largest machine tool trade shows, will open its door soon. The EMO Hannover 2019 will be held for six days from September 16 to 21, 2019. More than 2,100 companies from 47 countries will participate including at least 90 Japanese companies. SEISANZAI Japan, which offers information of Japanese Factory Automation (FA) builders, has planned EMO Hannover 2019 Special Feature. It shares the latest products information exhibited by Japanese FA builders by category for your preparation. If you check this, you will be more and more looking forward to visiting EMO Hannover 2019.

EMO Hannover 2019 Special Feature

Machining centers (1/2)

Machining centers (2/2)

Lathes Turning centers

Grinding machines & EDM

Ancillary equipment for machine tools (1/3)

Ancillary equipment for machine tools (2/3)

Ancillary equipment for machine tools (3/3)

Cutting tools (1/2)

Cutting tools (2/2)

 

Many new products and technologies are showed off

EMO Hannover is the largest machine tool trade shows of the world, which is held in Europe. It is held once every two years in an odd year. The EMO Hannover 2019 will be held at Hannover Messe in Hannover, Germany. More than 2100 companies from 47 countries will take part in, and the exhibition area is about 180,000 square meters, which is almost the same size as the previous EMO. Approximately 130,000 people visited last time.

There are two major features of EMO Hannover: The one, many new products and technologies are unveiled. 70% of exhibitors showcased the new products and technologies at the previous exhibition. The second is its internationality. Approximately 50% of the 130,000 visitors came from countries other than Germany at the last time. About 10% of visitors came from outside Japan at the machine tool trade fair JIMTOF 2018 held in Tokyo, Japan. Comparing with these results, it could be said that EMO Hannover is a very international trade show.

More than 100 machine tools are connected

The theme of EMO Hanover 2019 is “Smart technologies driving tomorrow’s production!” The keyword is Industrie 4. 0 (I4.0), which is promoted by German governments and aims to make the manufacturing industry smarter.

What people would like to focus on related technology of I4.0 is an universal machine tools interface called umati. umati is an open standard, which can easily send the machine tool data of several machine tool builders mounted on various control equipment to higher-level core systems. The special booth for umati will be prepared at EMO Hannover 2019.

The organizer will give a demonstration of connecting more than 100 machine tools to the network using umati. In addition, Additive Manufacturing (AM) technology is one of highlights this time. You can see the AM Circle, a special display of AM technology, at the venue.

Introducing exhibits of Japanese FA builders by six categories

Hannover Messe, the EMO Hannover 2019’s venue, is very huge. It takes fifteen minutes to walk from one end to the other one. Therefore, it is necessary to carry the venue map to go around efficiently. The following photo is a venue map.
(You can download the venue map here)

More than 2,100 companies from 47 countries will participate in EMO Hannover 2019. At least 90 Japanese companies will participate. What products will Japanese FA builders showcase at EMO Hannover 2019?

SEISANZAI Japan prepared a special feature EMO Hannover 2019. It exposes exhibits information of major Japanese FA builders exhibiting at EMO Hannover 2019. The products are divided into five categories: Machining centers, Lathes & Turning centers, Grinding machines & EDM, Ancillary equipment for machine tools ,  and Cutting tools. You can get the latest information of Japanese FA builders you are interested in by clicking the product category of the following links. EMO Hannover 2019, where new products and latest technologies from FA manufacturers gather together, is coming soon!

 

Please click the name of product categories!
You can see the products of Japanese FA companies,
which will be exhibited at EMO Hannover 2019 !

EMO Hannover 2019 Special Feature

Machining centers (1/2)

Machining centers (2/2)

Lathes Turning centers

Grinding machines & EDM

Ancillary equipment for machine tools (1/3)

Ancillary equipment for machine tools (2/3)

Ancillary equipment for machine tools (3/3)

Cutting tools (1/2)

Cutting tools (2/2)

This article was translated by “T-4OO”.

Share On :

Recommended

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   EMO Hannover 2019, the largest machine tool trade shows, will open its door soon. The EMO Hannover 2019 will be held for six...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Ancillary equipment for machine tools (1/3)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   Nikken Kosakusho Works / 5AX-2MT-182-250B   Nikken Kosakusho Works (Hall 5, Stand G59) will exhibit 5AX-2MT-182-2...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Ancillary equipment for machine tools (2/3)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   MST Corporation / SMART GRIP MST Corporation (Hall 3, Stand H5) will demonstrate and give a presentation of tool holders ...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Ancillary equipment for machine tools (3/3)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   NSK / SURSAVE NSK (Hall 7, Stand B34) will propose solutions to customers' issues on the theme of "more than precision." ...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Cutting tools (1/2)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   OSG / ADO-TRS OSG (Hall 4, Stand G67) will show off cutting tools for hole and thread processing and milling processing. ...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Cutting tools (2/2)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019. Tungaloy / T9200 series Tungaloy (Hall 4, Stand G41) will show off T9200 series, CVD coating materials for steel turning. T9200 ser...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Grinding machines and EDM

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   ▶ Grinding machines Okamoto Machine Tool Works / UPZ63Li Okamoto Machine Tool Works (Hall 11, Stand D71), a total abrasive ...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Lathes & Turning centers

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   Okuma /LB3000EX II  ARMROID Okuma (Hall 27, Stand D26) will showcase 20 machine tools including 8 new models, such as 5-a...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Machining centers (1/2)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   MAKINO MILLING MACHINE / a500Z MAKINO MILLING MACHINE (Hall 12, Stand B36) will show off technologies, including automati...

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature Machining centers (2/2)

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   DMG MORI / DMC 90 U duoBLOCK DMG MORI (Hall 2) will use Hall 2 as a whole and showcase a total of 45 models, including 29...

Most Popular

1

News
- April 20, 2018

Mazda and Toyota tag team on U.S market strategy

On March 9, 2018, Mazda and Toyota Motors announced the establishment of a joint venture, Mazda Toyota Manufacturing USA (MTMUS), in Alabama. MTMUS will manufacture Toyota’s Corolla models as well as all new Mazda models, for the North A...

2

News
- December 3, 2018

Japanese motor giant invests in innovation on its home turf

On August 30, 2018, Daihatsu announced that it would construct a new plant at the Kyoto Plant in Oyamazaki Town, Kyoto Prefecture. Approximately 35billion yen is invested. The total floor area is approximately 42,000 square meters. The n...

3

News
- January 25, 2019

Honda increased production of motorcycle scooters in India

On October 4, 2018 Honda announced that it would establish a new production line at the plant of affiliated corporation in India, where motorcycles have been manufactured and sold. The new production line will be set up at the fourth plant ...

4

News
- March 27, 2019

North America Toyota makes a large investment of $ 750 million

Toyota Motor North America (TMNA), Toyota Motor's affiliated corporation in North America, announced on March 15, 2019 that it would invest $750 million in five US vehicle and power train plants. TMNA intends to expand local production o...

5

News
- November 19, 2018

Japanese watch pioneer halves production costs through automation

Automated production lines for watches started operation at a plant in Yamagata CASIO, a production subsidiary of Casio.  Investments are not disclosed. Casio's long-selling digital watch "A159WA" will be manufactured on the line.  The a...

6

Exhibition report
- September 4, 2019

EMO Hannover 2019 Special Feature

You can peek a part of Japanese FA companies' products, which will be showed off at EMO Hannover 2019.   EMO Hannover 2019, the largest machine tool trade shows, will open its door soon. The EMO Hannover 2019 will be held for six...